Types of Japanese Chisels: How to Use Them and Choose the Right One
Japanese woodworking has its own wide range of chisels, each made for a particular job.
Each type has its own shape and works best for certain tasks, so which one you reach for depends on the size of the material and the stage or spot you're working on.
This guide introduces the main types of Japanese chisels and the jobs they suit. Use it as a reference when you're looking for the right chisel.
Japan has many more chisels than the ones covered here, and names and categories can vary by region and by maker. Please also note that we don't currently carry some of the chisels featured below.
Two Main Types of Chisels
Japanese chisels fall into two broad groups based on how you use them: striking chisels (tataki nomi) and paring chisels. Striking chisels are hit with a genno hammer or wooden mallet to dig out wood. Paring chisels, on the other hand, are pushed by hand to shave and clean up holes and grooves that a striking chisel or other tool has already cut.
What Are Striking Chisels?
A striking chisel is made to be struck on the end of the handle with a genno hammer or wooden mallet. You use it mainly for digging into wood, such as cutting holes and grooves or chopping away waste.
Because the impact can split the handle, striking chisels usually have a metal hoop (katsura), sometimes called a ferrule in Western woodworking, on the end of the handle.
Learn more about the chisel hoop (katsura)
What Are Paring Chisels?
Paring chisels are for refining holes and grooves that a striking chisel or other tool has already cut. You use them to shave the inside of a mortise, the bottom of a groove, or a spot a hand plane can't reach, leaving a flat, clean surface.
You usually push a paring chisel by hand rather than striking it with a genno hammer. Because of that, many don't have a hoop, and some have a longer neck and handle so you can control them easily with both hands. Striking a chisel that has no hoop can crack or split the handle, so always use each chisel the way its product directs.
Check out paring chisels
Types of Striking Chisels
Striking chisels include oire nomi chisels for general woodworking, atsu nomi chisels for working structural timber, shinogi nomi chisels for dovetails, and mukomachi nomi chisels for cutting narrow, deep mortises.
Oire Nomi Chisels
|
Common Uses:
- Shallow holes and grooves
- Shallow mortises
- Cleaning up roughed-out mortises
- Working up to the tenon shoulder
- Small detail work, such as kumiko (Japanese lattice work)
- General woodworking
and more
|
Oire nomi chisels are versatile all-rounders for general woodworking. They're what many people call a bench chisel in English.
You can use them to cut shallow holes and grooves, clean up roughed-out mortises, and work around tenon shoulders. They handle so many woodworking tasks that they also make a great first chisel.
Their size does limit them, though. They aren't suited to cutting large, deep holes, so choose the chisel that fits the job: atsu nomi chisels for structural timber, or mukomachi nomi chisels for narrow, deep mortises.
Check out oire nomi chisels
Shinogi Nomi Chisels (Dovetail Chisels)
|
Best For:
- Cutting the corners on the socket (female) side of a dovetail joint
and more
|
Shinogi nomi chisels have a blade with a nearly triangular cross-section. In English, they're often called dovetail chisels. The side edges are thinner than on an ordinary chisel and the sides slope more steeply, so you can work into a sharp-angled spot like a dovetail corner without the side of the chisel rubbing against the surface you've already cut.
Shinogi nomi chisels come in two types: one with a hoop that you strike, and one without a hoop that you push by hand.
Atsu Nomi Chisels (Timber Framing Chisels)
|
Best For:
- Working structural timbers such as posts and beams
- Rough work on large pieces of wood
- Cutting large, deep holes
and more
|
Atsu nomi chisels are striking chisels with a thick, sturdy blade and a larger handle. Depending on the region or maker, they may also be called hon tataki nomi or just striking chisels.
You use them for work that takes heavy blows, such as shaping large structural timbers like posts and beams or cutting large, deep holes. Wider versions have a slightly thinner blade and are called cyu usu nomi chisels.
Check out timber framing chisels
Mortise Chisels (Mukomachi Nomi)
|
Best For:
- Mortises for doors, windows, and furniture
- Narrow, deep mortises
and more
|
Mukomachi nomi chisels are made for cutting narrow, deep mortises. In English, they're known as mortise chisels.
Compared with oire nomi chisels, the blade is thicker and the cross-section is more squared off. Making the blade thick while keeping it narrow gives it the strength to take hard blows without bending.
The neck is the same width as the blade or narrower, so the chisel can reach the bottom of a deep mortise. There's even a special mukomachi nomi chisel with two blades side by side, for cutting mortises for double tenons efficiently.
Types of Paring Chisels
Paring chisels include tsuki nomi chisels for finishing tenons and joints in structural timber, usu nomi chisels for finishing doors and furniture, and kote nomi chisels for working spots that ordinary chisels can't easily reach. These chisels generally have no hoop, and you push them by hand.
Tsuki Nomi Chisels
|
Best For:
- Finishing tenons, mortises, and joints in structural timber
and more
|
Tsuki nomi chisels are pushed by hand rather than struck with a genno hammer. The neck and handle are long, so you hold the chisel in both hands and push it forward.
Use one to shave the inside of a mortise that you've roughed out with a striking chisel, or to flatten the faces of tenons and joints.
Usu Nomi Chisels
|
Best For:
- Finishing narrow, deep grooves, tenons, mortises, and recessed surfaces in doors and furniture
and more
|
Usu nomi chisels are paring chisels with a thin, long blade. You use them the same way as tsuki nomi chisels, usually holding them in both hands and pushing forward.
They're for work a hand plane can't finish, or has trouble finishing.
Kote Nomi (Crank-Neck) Chisels
|
Best For:
- Finishing the bottom of a stopped groove
- Finishing the corners of a dovetail socket
and more
|
Kote nomi chisels have a neck bent like a plasterer's trowel. Because the neck is curved, the handle and neck stay clear of the workpiece, so you can work inside recesses and at the bottom of stopped grooves, spots ordinary chisels can't easily reach.
Like dovetail chisels, they have thin side edges and steeply sloped sides, so the sides are less likely to touch the corners of a groove. That makes them a good choice for finishing dovetail sockets and other sharp-angled corners.
Check out kote nomi chisels
Other Specialty Chisels
Japan has many more chisels than the ones covered here. One of the best known is the wood carving chisel, used for carving and sculpting wood. Wood carving chisels come in flat, round, triangular, and bent-neck shapes, and you choose among them based on the shape you're cutting and how you carve.
We'll cover wood carving chisels in another article.
Wrapping Up: Choosing the Right Chisel
The key to choosing a chisel is to match it to the work you're doing.
- General woodworking: oire nomi chisels
- Rough work on structural timber: atsu nomi chisels
- Dovetail corners and sockets: dovetail chisels
- Narrow, deep mortises: mortise chisels
- Finishing large tenons and joints: tsuki nomi chisels
- Narrow, deep grooves and finishing doors and furniture: usu nomi chisels
- Stopped grooves and the inside of recesses: kote nomi chisels
If you don't have a specific job in mind, oire nomi chisels are a good first chisel, since they handle such a wide range of general woodworking. If you do know what you'll be doing, choose the chisel made for that work.
FAQ
Which Size Should I Choose?
Choose a size that matches the width of the area you want to cut. If the blade is much narrower than the work, you'll have to keep repositioning it, which takes a lot of time. If it's too wide, it won't fit into the work.
I'm Just Getting Started in Woodworking. Which Chisel Should I Buy?
For your first chisel, we recommend an oire nomi chisel. It's versatile enough for shallow holes and grooves, cleaning up mortises, small detail work, and many other woodworking tasks. If you have a specific job in mind, choose the chisel that suits it.
Which Genno Hammer Is Best for Striking Chisels?
For striking chisels, we recommend a daruma genno hammer, since it's easy to aim at the end of the chisel handle. Choose a weight that feels comfortable to you, using about 300–450 g as a guide.
Are There Right-Handed and Left-Handed Chisels?
Chisels can generally be used with either hand.
What Is Kakuri's Hybrid Style Chisel?
It's a chisel that blends Western and Japanese styles. Specifically, it's a Western chisel blade fitted with a Japanese wooden handle.